[. . . ] - 4 sheaths for a safe storing of the cutting rotors - 1 lifting aid for lightweight foods or foods that stick - fig C. **: Generic list, the number and type of blades can be different depending on the chosen kit. The Tefal INGENIO 5 seconds chopper will help you prepare your meals for a long time to come if you take note of the following instructions. [. . . ] Do not operate the appliance if : - the container is empty - the blades of the cutting rotor are damaged - there is visible damage on the appliance or it is not functioning properly - if the mechanism is blocked. Always store the cutting rotors in their protective case, when you do not use the appliance. If it is used for professional purposes, the warranty will be void and no liability will be assumed. Use & Care INGENIO® 5 seconds chopper* (*: for a first chopping result) Congratulations on your purchase of the Tefal® INGENIO® 5 seconds chopper. This manual chopper includes (**): fig A - 1 anti-slip container with a 900ml capacity - 1 lid with pull mechanism and a locking system - 1 patented cutting rotor composed of two independent stainless steel blades - fig. W ; for chopping all your fruits, vegetables, nuts and herbs (apples, strawberries, tomatoes, nuts, herbs, …). - 1 patented cutting and mashing rotor composed of independant stainless steel blades - fig X ; for mashing all your cooked vegetables or fruits (potatoes, carrots, courgette, Using 1. Remove all the parts from the box and clean them thoroughly by hand before using for the first time. Put the lifting aid on the table, it must be stable (otherwise just turn it). Hold the wing with one hand and with the other hand hold the cutting rotor on the fixed wing and the blades in the same position as the fixed wing (light green), then push the cutting rotor from the top on the lifiting aid. It will lift up the herbs, garlic, chili from the bottom of the container and chop it very finely. Place the cutting rotor in the container with the blades above one another to optimize the space for the ingredients you want to chop. Cut the big ingredients such as carrots or onions in a piece shorter than the length of the blades so that they will not block the blades of the cutting rotor. Then place them in the container while making sure that the cutting rotor will remain straight. [. . . ] Safe storage of the cutting rotors First, place the lower cutting blade of the rotor in its protective case. Then rotate the plastic axle above the second cutting blade until the blade is in the correct position and press it into the protective case. - 4 etuier for trygg oppbevaring av kutterotoren - 1 løftehjelp for lette ingredienser eller mat som kleber - fig. [. . . ]